When using a refrigerant handheld laser welding machine, in order to ensure the safety of the operator, eight safety precautions are in place to protect the welder.
Safety protection of refrigerant handheld laser welding machine:
1. Welding LOOP safety protection: The equipment is equipped with safety clamps to avoid accidental light emission after lifting the gun;
2. Light output warning protection: The welding gun and equipment have clear light output prompts to clearly indicate the warning;
3. Pressure protection: The equipment is equipped with pressure protection, and light is allowed to be emitted when the external gas connection is normal;
4. Welding gun temperature protection: The welding gun design effectively avoids heating and prevents personal injury caused by high temperatures;
5. Protection against accidental touch of welding gun button: The design of the welding gun button protection shell prevents the welding gun from accidentally emitting light due to placement errors;
6. Protective mirror protection: equipped with protective mirror installation detection function, allowing light to be emitted when the protective mirror installation is completed;
7. External Chain Protection: Equipped with an external safety chain interface, it can be connected to external emergency stops, safety pedals, and other devices to facilitate safety control in factories and assembly lines;
8. Emergency switch: A convenient button is installed on the top of the equipment to immediately stop the device in case of an accident.
What to pay attention to when using a refrigerant handheld laser welding machine:
1. Wear protective goggles: Operators must wear protective goggles to protect their eyes from laser radiation damage.
2. Clearing combustibles: Before welding operations, combustibles on site should be cleared to prevent the occurrence of fire accidents.
3. Regular maintenance and inspection: The handheld laser welding machine should be regularly maintained and inspected to ensure that it is in good working condition, and potential safety hazards should be detected and resolved in a timely manner.
4. Professional maintenance: If there is a problem with the equipment, it should be sent to contact after-sales for repair. Do not disassemble, repair or modify it yourself to avoid more serious safety accidents.
By following these precautions, it is possible to minimize the risk of harm to the welder caused by the refrigerant handheld laser welding machine during use, ensuring its safety.
